ZAP Industries LLC logo
  • Home
  • Services
    • Commercial
    • Residential
    • Oil & Gas
    • Farm & Ranch
    • Solar
    • Repair
  • Safety
  • Careers
  • Shop
  • Blog
  • Home
  • Services
    • Commercial
    • Residential
    • Oil & Gas
    • Farm & Ranch
    • Solar
    • Repair
  • Safety
  • Careers
  • Shop
  • Blog
(701) 513-9012
Request Service
Home EV Charger Installation in Western North Dakota: Level 2 Costs & Cold-Weather Tips
  • November 17, 2026
  • By Nic Taylor
  • Blog

By Nic Taylor, Master Electrician, ZAP Industries (formerly ZAP Electric), Dickinson, ND

More electric vehicles are showing up in driveways around Dickinson, Belfield and up and down I-94. Whether you just bought a Tesla, an F-150 Lightning or a plug-in hybrid, the first question is the same: how do I charge this thing at home?

Out here, there’s a second question too: how does all this hold up when it’s 25 below in January? Here’s what Western North Dakota homeowners should know before putting in a home charger.

Level 1 vs. Level 2: what’s the difference?

Most EVs come with a cord that plugs into a regular 120-volt wall outlet. That’s Level 1 charging. It works, but it’s slow. For a lot of drivers it only adds a few miles of range per hour, and on a cold night it may barely keep up with what the battery loses just staying warm.

Level 2 charging runs on 240 volts, the same kind of circuit that powers an electric dryer or range. A Level 2 charger can charge your vehicle several times faster than a standard outlet, so you can plug in when you get home and wake up to a full battery.

Tesla Wall Connector Level 2 EV charger mounted on a garage wall with the circuit run in conduit, the kind of home charger ZAP installs in Western North Dakota

What does a Level 2 install cost?

Every house is different, so there isn’t one price that fits everyone. The total comes down to two parts:

1. The charger itself. In our shop, Level 2 home chargers currently start at $549 for the ChargePoint Home Flex, $585 for the Tesla Wall Connector (Gen 3), and $660 for the Tesla Universal Wall Connector, which works with Tesla and most other EVs. You can browse EV chargers in our shop and choose the charger only or the charger with a professional install by ZAP.

2. The installation. This is where your home makes the difference. The main things that affect the install price are:

  • How far the charger is from your electrical panel. A charger on the other side of the garage wall from the panel is a quick job. A detached garage or a long run across a basement takes more wire and more labor.
  • How much room your panel has. A Level 2 charger needs its own dedicated 240-volt circuit, often 40 to 60 amps. We’ll do a load calculation to make sure your service can handle the charger on top of your furnace, water heater, dryer and everything else.
  • Whether you need a panel upgrade. Older homes, especially those with 100-amp service, sometimes don’t have the capacity. In some cases a smart charger that can be turned down, or a load-management device, avoids a full upgrade. In others, upgrading the panel is the right call.
  • Permits and inspection. A new 240-volt circuit for an EV charger is permitted work. We handle that for you. (Here’s more on how electrical permits and inspections work in North Dakota.)

The best way to get a real number is to have us check your panel and measure the run. You’ll get a straight quote before any work starts.

Why it should be a licensed electrician

An EV charger pulls a heavy load for hours at a time, every night. The electrical code treats it as a continuous load, so the wire, breaker and connections all need extra headroom. Undersized wire or a loose connection can overheat behind your wall long before anyone notices. A licensed, inspected install protects your home, your warranty and your insurance.

Cold-weather tips for EV owners in Western ND

EVs work fine in North Dakota winters, but a little planning goes a long way.

  • Charge in the garage if you can. Batteries charge faster and more efficiently when they aren’t ice cold. A charger mounted inside an attached garage is the easiest setup in January.
  • Precondition while you’re still plugged in. Most EVs let you warm the cabin and battery from your phone before you leave. If you do it while plugged in, the heat comes from the wall instead of your battery, so you start the day with more range.
  • Expect less range in the deep cold. Cold batteries and cabin heat both eat into your range. Plan a little extra margin on winter road trips, especially on long stretches between towns.
  • Keep it plugged in overnight. Plugging in every night keeps the battery topped off and lets the car manage its own temperature.
  • Going outdoors? Pick the right charger. If the charger has to go outside, choose a unit rated for outdoor use and have the circuit run and sealed properly so snow, ice and meltwater stay out.

Thinking about backup power too?

A blizzard outage means no charging and no heat. A properly sized standby generator keeps your furnace and essentials running, and we can plan your panel, charger and backup power together so everything works as a system.

How ZAP can help

We install Level 2 chargers in attached garages, detached shops and new builds across Western North Dakota. We’ll help you pick the right charger for your vehicle, check your panel, pull the permit, and get you charging. Learn more about our residential electrical services.

Ready to charge at home?

ZAP Industries is a licensed North Dakota electrical contractor (License #000047000) based in Dickinson. We take calls 24/7 and offer weekend emergency service across Western North Dakota.

Call (701) 513-9012 or email ntaylor@zapelectric.llc to schedule your EV charger install.


Photo: “Tesla Wall Connector” by Whoisjohngalt, CC BY-SA 4.0, via Wikimedia Commons. Resized.

Share this post?

Facebook Twitter

Add Your Comment

Recent Posts

  • Home EV Charger Installation in Western North Dakota: Level 2 Costs & Cold-Weather Tips
  • Smoke & CO Alarms: Where North Dakota Code Requires Them and How Often to Replace Them
  • Winterizing Your Farm or Ranch Electrical: Stock Tank Heaters, Heat Tapes & Block Heaters
  • Electrical Permits & Inspections in North Dakota: What Homeowners Should Know
  • Garage & Shop Heater Sizing: How Many BTUs Does Your Shop Need?

Recent Comments

No comments to show.
ZAP Industries LLC logo
ZAP Industries LLC (formerly ZAP Electric) 2592 4th St. E., Dickinson, ND 58601 (701) 513-9012 ยท ntaylor@zapelectric.llc ND Contractor License #000047000 Electrician and electrical contractor in Dickinson, ND. Serving Western North Dakota and the I-94 corridor to Mandan and Bismarck. We take calls 24/7 and offer weekend emergency service calls. About | Services | Repair | Shop | Pay Invoice | Safety | Careers | Privacy | Terms | Blog Generators | Garage Heaters | ShowHome Lighting | Solar
Youtube Linkedin-in Facebook-f